First of all, the material is important in all shelves parameters. Because of the use of the material determines the shelf performance, such as load bearing capacity and service life, etc. Shelves in Z main material is steel, cold rolled steel, Angle steel, steel plate.

Secondly, should focus on shelves specification, because it is will not reduce the height of their shelves, heavy shelves plant to reduce the length of the shelf, but on the thickness of the layer board, such as the diameter of the column is not easy to detect the local checkers. Therefore, selection and acceptance of the shelf to measure a specification for the bottom of the plate, column, beam, etc.

Again, the operation of the shelves must pay attention to these points: absolutely not overweight; Card board and the size of the goods should be slightly smaller than 100 was net space; Don't overload, shelves layer, layer width has been restricted; Should try to be careful not to encounter shelves; Put the light in the above; Guangzhou shelves manufacturers operating personnel do not directly into the bottom shelf; If you have found seriously damaged shelves of beam and column m, should immediately stop stop using; It is forbidden to impact, forklift in the process of running, regularly check the shelves in a timely manner. Shelves above have put the goods, do not use without the standard table (card board) shelves use.

Shelves to denote and shelves for storage. In warehouse equipment, shelf is specially used to store into a storage equipment items. Pallet racking manufacturer in logistics and warehouse occupies very important position, with the rapid development of modern industry, through put a substantial increase, to realize the modernization of the warehouse management, improve the function of the warehouse, not only requires the shelves number, has multi-function and requirement, and can realize mechanization, automation requirements.