In the warehouse storage, cargo storage shelf equipment is usually used, and for the new warehouse, the first job is to choose a suitable storage system and set up perfect. Now on the market many storage shelf manufacturer, even if we don't have problems in the early stage of the investigation, but in the actual acceptance process, also must pay attention to check the quality of the shelves whether qualified, have to cut corners or size discrepancy. That for inexperienced friend, want to check?

1, material quality and thickness

Storage shelves of cold-rolled steel profile is generally selected material is given priority to, the thickness of the plate is also according to the bearing to design, to say the shelf bearing index material and thickness is occupied a very important part of. So only qualified steel plate thickness no problem just can be at ease to use, you can mainly to detect when acceptance of in the two data.

2, the structure design

View the shelf structure design, such as column to see whether section bending and more uniform, general uniform symmetrical structure is better; To look at the link structure of beams and beams and connection form, linked to more is better, the more stress the more stable, linked to closely contact with the post, closely without clearance structure to better stress, will be more durable.

3, surface treatment

The surface of the storage shelves usually through pensu processing. The surface of the coating to uniform and has strong adhesion, and check the post hole inside edge whether there are omissions didn't handle good, you can also tap the view surface is easy to fall off, easy to fall off it is easy to rust. Other shelves without properly in the process of transportation, is likely to break, these also need to pay attention to check.

Shelf surface coating processing

4, size problem

Usually the size of the production of storage shelves and design basic is consistent, the deviation is not too big, so at the time of acceptance can measure the size, look at all the parts and overall situation of whether there is a big dimension deviation, if there is then may have to cut corners, or production process has a problem, is within the scope of nonconforming product.

5, the welding process

Shelf production and processing involves many technology, such as welding technology is unqualified, we can see whether the joint even full, is there any indirect or welding leakage, if found that the problem can be rejected, using unqualified may leave hidden trouble shelf products for use in the future.