Attic shelves believe everyone is familiar with, it is a practical shelves, widely used in the industries of automobile, electronics, machinery, etc. Attic shelves can be designed into multi-layer floor, usually 2 to 3 layers, set of stairs, banister, and elevators, etc., apply to the high warehouse, small goods, manual access, large amount of storage.

The attic shelf

Attic shelves of practical advantages:

1, will be better able to partition storage space, make full use of the height of the warehouse;

2, floor laid special floor, can use the pattern plate, chrome steel plate, etc., have stronger bearing capacity, good entirety, carrier layer, surface smooth, easy to lock, etc;

3, fully considering the humanized logistics, design aesthetics, structure and easy installation, convenient disassembly, flexible design can be according to the actual situation;

4, suitable for storing various item types.

The attic shelf

The attic shelf installation steps:

1, when installation, need a person take a pillar erected, balance in the face of distance, can according to the length of the beam, another person take a bar can be installed the underlying first, put the CARDS on the ends of the beam column under the card slot;

2, hurled the beam down until all the CARDS in both ends, then there is installed above a few layers;

3, need to install two beams each layer, pack to count first hole to locate, around and to balance both ends in the same height;

4, beam installed on the beam can be directly put layer board, press flat is ok;

5, check acceptance, after the shelves on the designated position, check whether the parts have been installed, check no problem can use.