Narrow roadway shelves is a kind of special storage shelves, is mainly composed of beams, columns, brace and the self-locking bolt. The main body of the rack system adopts beam type, the difference is on the floor at the bottom of the add action guide. Compared to other storage system, narrow channel can be 1.5 2 meters, so in to a much higher space utilization.

Professional customized narrow roadway shelves for warehouse height above 12 m, using three to the pile of stamping car access homework, is characterized by good selectivity, high efficiency, good safety, high efficiency.

Application:

1. The channel width of narrow shelf pallet height, usually greater than can realize high density storage.

2. The speed of the circulation of goods is higher than general shelves, narrow type can work up to 14 meters high in the sky.

3. The flexible operation mode, access mode can be first in first out, after the advanced, in order to satisfy the demands of different use.

Note:

1. Narrow roadway shelves forklift is divided into two categories, the lines of magnetic force and guide rail, when using the latter, remember that the first layer needs to be placed on the beam, beam height should not exceed the height of the guide rail, the height of the goods need to be within the range of guide rail can withstand.

2. The storage time need dedicated forklift (three to stacking forklift) to access, forklift will guide rail sliding along the scheduled, because of the narrow aisle, so the staff need to work in strict accordance with the manual to operate.

3. At the time of carrying goods, must, in accordance with relevant provisions of the design, each layer of the load cannot exceed limit, to prevent potential safety hazard.