When we are in the supermarket, whether small or large, can see the supermarket display inside the discharge of the goods are neatly on the shelf, so these shelves are needed after heavy production technology for grinding quality pass can be used. Then by focusing on Beijing shelves, shelves shelves factory in hebei, Beijing bo shelf together with you to understand the basic process.

1, cutting: as the steel is a kind of cluster structure, we need according to the product need to be cut.

2, cold-rolled, hot-rolled coil as raw material, acid pickling to remove oxide skin. Finished products for the hot rolled steel coils. Continuous cold deformation caused by cold hardening enhanced the intensity of the hot rolled steel coils, hardness, toughness and plasticity, reduces the stamping performance. Applies only to simple deformation of parts. Due to the hot galvanizing line sets the annealed wire, hot rolled steel coils can be used as a galvanizing plant raw materials. The weight of the hot rolled steel coils is usually 6-13.5 t, continuous rolling at room temperature.

3, pickling, cold bending steel some of the surface oxide film. If not for pickling and coating, in the whole shelf products in use process, the paint will fall off. Pickling of purpose is to remove the oxide film on the surface of the metal.

4, phosphide, phosphate chemical conversion film are formed by chemical and electrochemical reaction process, called the phosphating film. Parent metal phosphating is the purpose of protection, to a certain extent, prevent the metal corrosion. Can be used as a primer before coating, to improve coating adhesion and corrosion resistance. Can be used for the anti-friction lubrication in the process of metal cold working.

5, electrostatic spraying: using electrostatic spraying equipment (electrostatic sprayer) on the product surface spraying powder. Under the effect of static electricity, the powder evenly adsorption on the surface, powder coating. Through baking, flow flat, high temperature curing, Z will get different results (powder coating effect different) coating. Spraying effect on the mechanical strength, adhesion, corrosion resistance, ageing resistance, etc is superior to the coating process, cost and effect of coating.

Supermarket shelves can make full use of the modelling of supermarket shelves as a result, both make a space more reasonable, and bring benefits to the supermarket. Detail decides success or failure.

Hebei factory tell you supermarket shelves should be paid attention to nurse daily at 3 o 'clock:

1, in the use of supermarket shelves, clean is a basic of Z. Only clean supermarket shelves can attract consumers. Supermarket shelves use personnel at the same time, maintain a clean and tidy supermarket shelves should also regularly check on supermarket shelves, ensure the normal use of the supermarket shelves.

2, in general, people's average visual acuity between 110 to 120 degrees, visual width between 1.5 m to 2 m. In-store shopping on foot Angle of 60 degrees, visibility 1 meter. Therefore, the businessman in the use of supermarket shelves, should combine the visual habit of consumers, to ensure the display of products, improve the probability of purchase.

3, on the shelves in the cleaning process, we need to use dry cloth, because the shelf material generally is a metal base, only combined with temperature, moisture and oxygen of the metal is oxidation. If you use a wet dishcloth, will accelerate shelf area of oxidation, shorten the shelf life, so you must use dry cloth.

www.longfugg.com