Now what we call the automated stereoscopic warehouse or automated warehouse system, its inclusion has been greatly beyond the previous definition. Simple classification, including the tray 3 d library (AS/RS) and box type 3 d library (Miniload). And the two can be divided into many subclasses, such as:

The AS/RS: ningbo automated stereoscopic warehouse factory single depth, double depth of three-dimensional, dense library storage systems (such AS a variety of forms). In addition, there are different forms of pallets, shelves in the form of a different form, rail, control forms and the different of stacker structures, into many small classes;

Miniload: the depth of the single, double depth, multilayer shuttle car system, 4 to the shuttle bus system, etc.

Constitute the main equipment and an automated stereoscopic warehouse system including: shelf system equipment (shelves, tunnels, platform, etc.), stacking machine, conveyor systems, pallet, network and information system, etc. In addition to supporting the forklift, signs, guardrail, etc.

From the perspective of the designer to consider, ningbo factory automation stereoscopic warehouse is introduced may be only a part of the logistics system, then should consider is the position of the whole, and form a complete set of system, including the receiving system, delivery system, storage area, picking, packing, sorting, etc. Of course, choose what kind of storage form is critical.

The tray design of tray: before the important part of automation stereoscopic warehouse design. After years of change, the recommended standard pallet (1200 * 1000 * 150 mm). Of course, this rule is not can't change.

Depth of the depth of the single or double: a double depth is actually not much, in addition to the double depth will be around 15-25% of inventories, its a lot of restrictions. Some designers with double depth of three-dimensional library, if you don't do a careful analysis, tends to reach the purpose.